For water and wastewater utilities
Automation software for water utilities, running on Allen-Bradley hardware
One edge package per site reads your site data, runs alarms and compliance locally, and reports to your SCADA like another RTU. Add WX Central when you want every site on one screen.
At the site
What Changes
Fewer callouts, and no scramble before the compliance audit.
- Fewer emergency callouts, and less energy per volume pumped.
- A WAN outage stops nothing at the site.
- Your SCADA polls it like any other RTU. Nothing changes on the master.
Architecture
How It Works
Three layers, and you can stop at the first one.
- At the site, WaterWorksX Edge reads DNP3, EtherNet/IP, OPC UA, PROFINET, Modbus and HCC2 and serves it to SCADA as a standard outstation.
- Control stays in your Logix controllers.
- Across sites, WX Central adds one view, fleet updates and backup over one outbound connection per site.
Live and operational in Australia and New Zealand.
WaterWorksX Edge in production. Real sites, real data, 24/7.
Pilot
Start With One Site
Pick a site. You install WaterWorksX Edge next to what is already there, and you watch it run on your own network before any bigger decision.
- 1Nothing is removed or rewired
- 2It runs on your network, with your data
- 3You judge it on your own site
- 4Roll it out further only if it earns it
Nothing is removed or rewired
It runs on your network, with your data
You judge it on your own site
Roll it out further only if it earns it
Products
WXT1
Telemetry unit on the Allen-Bradley HCC2, ready for reservoirs, flow and pressure.
WXR1
Outdoor MCC for wastewater sites, PowerFlex drives from frame 1 to 7.
WXP1
Pressure control panel on PlantPAx and PowerFlex.
WX Central
Every site on one screen. Sites carry on without it.
Integration
SCADA, business systems and GIS, through open connectors.
Regular Updates
Signed updates, installed only when you approve.
The Platform
One Shared Tag Database
Every connector writes to one local tag database, so new devices and apps plug in without touching what already runs.
- Ingest
- Unified Data Points
- Consume & Analyze
- Pass Back to SCADA
- WX Central
- HydroFlow
One Platform
Runs on Your Hardware
The same software package runs on every supported platform, and each service updates on its own. The device is a site decision, not a software one.
One package, any supported device.
Works With FactoryTalk and Logix
If you already run Rockwell software, WaterWorksX connects to it rather than replacing it.
- FactoryTalk Optix for HMI screens at the site and in the cloud
- PlantPAx where a larger plant needs full process control
- LogixAI for anomaly detection on controller data
- Fiix to raise maintenance work orders from live asset data
- Energy Manager to track energy use per site and asset
Rockwell products are licensed separately from Rockwell Automation.
Why Choose WaterWorksX?
WaterWorksX is designed to solve the biggest challenges in water and wastewater network management.
End-to-End Integration
From sensors to cloud analytics, every component works as one system.
Predictive Maintenance
AI-driven analytics reduce unplanned downtime and extend asset lifespan.
Scalable & Modular
Flexible architecture adapts to growing infrastructure needs.
Reduced OPEX & CAPEX
Optimize operational costs while maximizing asset efficiency.
Secure & Future-Proof
IEC 62443-aligned security protects operations and data integrity.
Contact Us
Talk to an Engineer
You will be talking to the people who built it. Tell us about your sites and what you want fixed.
- See it running in a live demo
- Talk through a pilot site
- Ask a technical question
Offices
New Zealand:
WaterWorksX Limited, 136 Hutt Road, Wellington 5012, New Zealand
United States:
WaterWorksX Inc., Austin, TX 78731, USA